Guides

GW60 Data Deletion Guide

Posted on

After uploading your GPS data, you can choose to leave your data on the GW60 or clear the data log. For details on uploading GW60 data, check out our GW60 Data Upload Guide. Most GW60 users prefer to clear the log after each upload. This allows each session to be recorded in a separate file. If you don't clear both the Log Data and Top Speeds, the data will be merged. This causes issues such as seeing your previous session top speeds during your next session. There are 2 ways to clear the GW60 Log Data and Top Speeds: 1....

Read more →


GW60 Data Upload Guide

Posted on

There are 2 methods available for extracting data from the GW60 GPS: 1. With the Locosys GW60 Utility program (requires Windows PC); or 2. Without the Locosys GW60 Utility (works on PC/Mac/Linux). We find the second option is usually easier for people eager to upload their first session. So we will detail our guide for that method first: GW60 DATA UPLOAD WITHOUT UTILITY: 1. Press MODE to turn on - only if clock is not already displayed2. Press ADJUST to enter settings3. Press START button to scroll up to "USB CLASS"4. Press ADJUST and then RESET to scroll down to...

Read more →


GW60 First Use Guide

Posted on

All of our Locosys GW60 GPS watches are pre-configured with: Latest proven and fully-functional Firmware - currently V1.2; and Proven settings - so the watch works straight out of the box So when you purchase a GW60 GPS from Windsurfing Gear, all you need to do for the first use is: Charge the GW60 with the included USB cable until the screen turns off (fully charged). This takes 2-4 hours depending on the residual charge. Go sailing! When you're ready to start sailing press the GPS button (to turn on the GPS) and then press MODE and START buttons simultaneously...

Read more →